Every technician is IICRC certified and has handled attic water damage many times. You get a clear plan before any work starts.
We photograph the damage, log moisture readings and send the paperwork your adjuster asks for, so you have less to chase.
Water does not wait for business hours, and neither do we. Call any time and we will get a team moving.
When you call about attic water damage, you reach a restoration team that works in Manchester every day. We tell you what it will take, give you a clear quote and get a crew moving.
There are two ways an attic ends up wet. Rain gets in from above through worn shingles, failed flashing, or the seals around vents and chimneys. From below, household moisture rises and condenses on the cold roof sheathing if attic ventilation is poor. In both cases, almost nobody climbs up to check. For Manchester homeowners, our crew examines the attic, identifies where the water comes from, and dries the space.
Most attic jobs center on wet insulation. Fiberglass and cellulose both lose R-value when they get wet, so the home costs more to heat and cool. Worse, soaked insulation holds water against the ceiling drywall and the framing for weeks. We remove what is saturated, dry the wood with air movers and dehumidifiers, and treat any mold on the rafters or sheathing.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Ask a Tech: (612) 464-8286| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Ceiling drywall | A dry, flat stain that can be sealed and repainted | Sagging, crumbling, or it sat under soaked insulation for weeks |
| Cellulose insulation | Only the surface is damp and it is still loose | In most cases, because it has packed down or soaked through |
| Roof sheathing | Only stained, still firm, and reading normal once it has dried | It dips between rafters, feels soft, or has begun to delaminate |
| Fiberglass insulation | A small patch wet by clean rain and dried quickly | Any mold, dirt or matting, or wetness lasting past a few days |
| Recessed lights and wiring | No corrosion or moisture found during an electrician's inspection | Rust on the connections, or water inside the housing |
Rain that gets past the roof lands in the insulation, which absorbs it. Nothing shows indoors, so the leak goes unnoticed and the roof is not repaired.
In a still, warm attic, paper facing and wood that stay damp give mold ideal conditions. The sheathing, along with the top face of the drywall ceiling, is where growth can begin.
After repeated wetting, the insulation is saturated and water reaches the ceiling. In the room underneath, brown rings show up and the drywall may begin sagging.
The sheathing comes apart in layers and no longer grips the roofing nails. Rafters stay damp enough to decay, and mold covers large areas of the roof deck.
In a lot of homes the attic houses an air handler along with its condensate line and pan. When the pan overflows or the drain clogs, insulation gets wet for weeks without any rain as a warning.
With poor ventilation, mold commonly grows on the bottom of the roof deck. It can cover a wide area before anyone goes up to look.
Cable runs, junction boxes and recessed light housings are all found in attics. When they get wet there is a risk of shock and fire, so keep out until the power has been checked.
Compressed, damp insulation does very little insulating, and it may not recover after it dries. Rooms under the wet section run hotter or colder, and energy bills rise.
We check the roof deck, flashing points, vents and exhaust ducts to learn whether the water is a leak, condensation, or both. Thermal imaging and moisture meters show how far it reached.
We bag and remove insulation that is moldy or saturated, which lets the drywall and wood beneath it dry. We protect the living space below and keep the access path contained.
With dehumidifiers and air movers, the sheathing, joists and rafters return to normal moisture levels. We clean visible mold off the wood, then apply an antimicrobial.
You are shown the ventilation or roof problem to be corrected, and our findings can go to your roofer. When the attic has stayed dry, the R-value is restored with new insulation.
Have a different question? Call us and we will answer it over the phone.
Call (612) 464-8286Don't wait for small problems to become expensive emergencies. Call Manchester Restoration for fast, reliable service.
Call (612) 464-8286 Now