Filing a claim is easier with good records. We document everything and talk to your adjuster for you.
Water does not wait for business hours, and neither do we. Call any time and we will get a team moving.
Certified technicians, professional drying equipment and moisture readings you can see for yourself. No guesswork.
Most people who call us have never dealt with hardwood floor water damage before. We walk you through it on the phone, then send a local crew with the right equipment.
Wood floors react to water quickly. Moisture enters each board through its underside and edges, the boards swell and press together, and cupping begins as the edges lift above the middle. That does not mean the floor is lost. Boards of solid wood often return to flat if they are dried during those early days. What matters is removing moisture from the wood and from its subfloor steadily and under control.
Drying mats are how our team handles wet wood floors. The mats are sealed to the surface and connected to a vacuum unit that draws moisture up through the boards and seams, while dehumidifiers keep the room air dry. This takes longer than drying carpet or drywall, often a week or more. Sanding has to wait until the wood is fully dry. A cupped floor sanded early ends up crowned afterward.
Seams let the water through, and it fans out in the layer between flooring and subfloor. You can towel off the top and still have a saturated underside.
The edges come up as each board expands. A cloudy look can appear in the finish. The bare underside of the boards and the subfloor are where mold can start.
Swelling builds pressure across the floor. Edges get crushed together, nails work loose and parts of the floor may start rising from the subfloor.
Buckling, black staining and mold under the boards become likely. Drying is usually no longer enough, and the bulk of the wet flooring has to be replaced.
If cupped boards get sanded level before they dry, the high edges are ground away. Once drying is complete, the middles sit higher and you have a crowned floor.
Water under a floor travels. Cabinets and wall plates do not stop it, so it may enter adjacent rooms or come out at the ceiling one floor down.
Nails and staples that stay wet begin to rust and lose holding power. Dark marks from that rust soak into the boards and can be too deep to sand out.
Heavy airflow or heat dries the face of a board well ahead of its core. Lasting gaps and split or cracked boards are the usual outcome.
Readings are taken in the boards and the subfloor, and on dry flooring close by as a reference. The comparison shows how far down moisture reached and how likely the floor is to recover.
We extract any standing water immediately and clear furniture and rugs from the wet section. The faster water stops feeding the seams, the less the boards swell.
A vacuum system hooked to mats sealed on the surface lifts moisture out of the boards from above. The room is managed with dehumidifiers so drying stays even and the boards do not crack.
We track readings every day or two until boards and subfloor match dry reference areas. At that point you hear from us if it needs nothing, some replacement boards, or a refinish.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Call (612) 464-8286| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Baseboards and shoe molding | Solid wood trim that dries straight and can be reinstalled | Swollen or crumbling shoe molding and MDF base |
| Paper or felt underlayment | Rosin or felt paper that dries along with the boards above it | Underlayment exposed when boards come up, or with mold on it |
| OSB or particle board | Only OSB showing no edge swell | Swollen OSB and nearly any wet particle board |
| Floor finish | Mild haze that fades or can be buffed away after drying | Finish that peels or is stained, requiring sanding and new coats |
| Engineered hardwood | Brief surface water with no swelling at the edges | Planks that are delaminating, swollen or wet underneath |
Have a different question? Call us and we will answer it over the phone.
Call (612) 464-8286Don't wait for small problems to become expensive emergencies. Call Manchester Restoration for fast, reliable service.
Call (612) 464-8286 Now